Conveyor belt manufacturers to teach you how to maintenance and maintenance of conveyor belt
Conveyor belt manufacturers suggest ordinary conveyor belt running rate should not be greater than 2.
For larger pieces, abrasion resistant materials and use of strong unloading device should just accept low speed.
Walks machine transmission roller diameter and walks, associated with cloth layer and transmission drum, matching redirection roller, and should be based on walks to the requirement of roller groove Angle machine program rules, the reasonable selection.
Walked one, flame retardant with maintenance of way to what?
1, the difference between the sample and specifications the layer number of walks with unfavorable connect together to use, discussed its best accept plastic connection.
2, walks with example, structure, specifications, selection of layers should be based on the using condition of justice.
3, take walks in the transportation and storage, should keep clean and avoid sunlight value or the rain, rain, snow and prevent acid, alkali, oil, organic substances such as war, dissolving agent and heating device outside a meter apart.
4, storage stack temperature should be keep -
Between 40 ℃, relative humidity should be keep in 50 -
Between 80% RH.
5, storage period, the products should be arranged into a volume, not fold, arrange time should flip a quarterly.
Second, mesh belt maintenance of 1.
At the time of maintenance was carried out on the mesh belt is through to wipe, clean, smooth, mediation, etc. Several ways to realize, in the clean clean equipment when you need to list the sliding surface, screw, rack, gear box, oil hole place such as oil, not leak to guaranteeing each place also can not leak, equipment around the debris, debris, dirt, etc are also needs clean clean.
Devices, accessories, artifacts, and so on all need neat, pipeline and also will be put to have layers.
With packet network has excellent smoothness, to gas or oil change regularly, keep oil should not appear the dry rubbing.
To guaranteeing oil pressure is normal, the clear oil, clear oil, used oil fit requirement, oil gun, oil cup, linoleum clean.
Rubber conveyor belt manufacturer said rubber conveyor belt is the most expensive in the walking machine, is the worst part, walked in the machine operation process, walks with a variety of different nature and size of the load, and the turbulent stress in form, calculations show that walks with in about half of all walks machine equipment capability.
In different paradigms, layer number of specifications walks with unfavorable connect together to use, it discussed the best acceptance of cementing method or sulfide method.
So much can also be added in the use of life.
General should not be greater than 2 walking rubber belt running rate.
Big 5 m/s, blocks of abrasion resistant materials and use of strong unloading device should just accept low speed.
Walked rubber belt transmission roller diameter and walks, associated with cloth layer and transmission drum, matching redirection roller, and should be based on walks to the requirement of roller groove Angle machine program rules, the reasonable selection.
Rubber walks with example, structure, specification, layer number of reasonable selection should be based on using conditions.
Feeding direction should be walked along the belt running direction, to reduce material on the blow to walks with shall adopt chute, reduce material landing intervals;
Rubber belt walks by paragraph should shorten the roller spacing and the receive buffer roller for the leakage of material to take to accept soft moderate keep-off board, in order to avoid gear plate quality, scraping the broken walks with belt surface.
These are in common use in the process should pay attention to.
Want to take the use of the extended rubber walks life, be about to notice usually walks to take maintenance.