Cow milking machine is main equipment of modern mechanical milking, can greatly improve the efficiency of milking, familiar with its structure and operation method of understanding, the relationship between the quality of milk and cow breast safety, so be sure to understand its operation process in detail.
Like hand milking, use milking the cow milking machine should also be in hot water before (
Scrub and massage a breast.
Open the switch, switch on the power supply, make the motor rotation.
Adjust the vacuum pressure gauge, the vacuum close to 30 -
35 cm, usually not more than 40 cm.
Then thick rubber tube on the switch of the catheter, turn on the switch.
Then hand clenched milk a cup of milk, milk open the switch on the lid with another hand, from the far side of the milk cup set on the nipples.
Pulsator pulsation frequency general adjustment to 50 -
In milking process, through pipe is peer observation on milking machine milk flow conditions, such as no milk flow out of date, namely the milking barrel should be closed on the switch on the switch or catheter, gently remove the milk cup, hung on milking lid.
New kind of milk cup can fall off automatically according to the milk flow situation.
After finished milking cows each use machine, milk and related parts in contact with the milk remove clean, first rinse with cold water, then use 85 ℃ hot water to wash.
Method (is connected to main
Crude rubber tube)
Back, open the switch on the catheter, collection of milk, milk make a cup of water, milk and then open the lid on the switch, the water absorption into the milking stools, wash wash bucket again after breast milk cup and tube cover and barrel wall.
Wash finish again with hot water washing, then put the milking machine hung on the rack to dry.
Correct the cow milking machine operation process can not only guarantee the quality of milk, for the normal operation of the equipment, improve the work efficiency is of great significance.